Pages

DISCLAIMER:
The publication of any images or informations related to nazism, fascism or any other totalitarian regimes must be understood as the reproduction of historical accuracy and not as apology to these regimes, leaders or symbols.
ATENÇÃO:
A publicação de qualquer imagem ou informação referentes ao nazismo, fascismo ou quaisquer outros regimes totalitários deve ser entendida como reprodução do rigor histórico e não como apologia a estes regimes, líderes ou símbolos.

M4A3 Sherman Dozer Marines with deep wading gear - case report

Semper Fi!!
      Boys!! Let's see this specialized tank used by the Marine Corps in Pacific final battles: M4A3 Dozer Marines.

M4A3 Dozer with remains of deep wading gear
from Marine Corps in the Battle of Peleliu
(Operation Stalemate II) - November, 1944
History:
      The destruction generated by military operations, and various obstacles deployed by the Axis forces to slow down the progress of the Allied armour led to the need for a dozer tank. The US Army needed an armoured dozer able to clear roads, fill in ditches and bomb craters, clear rubble and move destroyed vehicles blocking roadways. The allied armies used several types of bulldozer, however, these machines were un-armoured and could be used only in zones far away from the frontline.
M4 Sherman dozer - 752nd Tank Battalion
clearing debris in Firenzuola, Italy - 1944
      The combination of a dozer blade with an armored fighting vehicle was first tried by the British Army in the North Africa theatre, during their campaign of 1940-1941, as a means of eliminating personnal and-or vehicle mines in the army's track.  By 1942, mine detectors were capable of finding hidden mines and the bulldozer blade equipped tank could then excavate the mines and move them out of the path. This could be accomplished without significant risk to the tank crew who were protected by the tank's armor and still retained the military capacity with maintenance of the main gun.
The real danger of mines: A Caterpillar dozer and an English M4A4 Sherman dozer
disabled by mines on a road in Enchenberg, France - 1944
      After American officers observed the British success, the US Army Corps of Engineers was assigned the role of creating and testing a tank/bulldozer vehicle. During 1942, the Engineer Board considered several different ideas. Destroying mines was only one potential task for a tank dozer that could also tackle overcoming ditches, debris, craters, and other antitank obstacles. It was not obvious that a tank was best; armored tractors were considered as an alternative design.
Armoured Caterpillar D-7 pushing a damaged Tiger II heavy tank off the road
           The standardized version of the bulldozer attachment for the M4 Sherman was finalized with two variants, the M1 for VVSS suspension tanks only and the M1A1 for the wider HVSS suspension or VVSS tanks. The M1A1 blade is 355mm wider than the M1 and the M1A1 has a 3-section telescopic jack while the M1 has a single section telescopic jack.

      Italy was the first combat use of the Sherman Bulldozer tanks. There the German Army was careful to destroy the bridges, culverts, and mountainside shelf roads that the Allies needed in their advance up the Italian peninsula. German units then used light-caliber weapons to stop the men and bulldozers sent forward to restore the roads. The Sherman tank-dozers solved this problem making immediate positive changes in the situation. At the Anzio beachhead, tank-dozers were used to extinguish fires in the large ammunition dumps that were targeted by German artillery. Once the tank-dozers were available, even large fires could be quickly contained by scooping dirt and pushing it over the burning containers.
M4A1 Sherman dozer from
16th Engineers - 1st Armored Division - Italy, 1944
       The lessons learned in Italy made the Sherman-dozer an item of high demand for the European Theater (ETO) from the invasion of Normandy to V-E Day. General Eisenhower expressed a personal interest in increasing the supply of these versatile machines, but manufacturing never caught up with orders from the field. For D-Day, a total of 393 tank dozers were requisitioned prior to 9 May 1944 for US forces, and another 100 for the British and 24 for the French. Only 24 were received in April 1944 and another 81 in May, far fewer than the requests. Nonetheless, the tank dozers were essential in clearing beach obstacles and allowing units to move off the beaches on D-Day and immediately after.
M4 dozer "Double Troble"
70th Tank Battalion - Utah Beach, Normandy, 1944
M4A4 British Sherman dozer
France, 1944.
      Following D-Day in the early stages of the Battle of Normandy before the Culin Cutter was developed (also called Rhino or Hedgerow Buster), the dozer Sherman was the best method of breaking through the Bocage hedgerows. Working with artillery and infantry, the tank dozers were highly effective in disrupting German defenses and making territorial gains.
M4A1 (76) with hedgerow Cullin cutter
in action.
      As the Allied armies moved out of France and closer to Germany, the tank dozers prepared tank and gun emplacements, cleared roadblocks, removed wrecked vehicles, snow and debris, filled craters, cleared mines, and built approaches for river crossings. While there were some mechanical and operational problems with the Sherman tank dozer, the value far outweighed the deficiencies with great benefit to the users.
M4A2 Sherman dozer comes forward to clear the way for Marines,
Iwo Jima, February 1945
      Relatively few Sherman tank bulldozers were used in the Pacific Theater of WW II, with some dozer-equipped light tanks filling the role. Where the Shermans were used, the tasks were similar to the ETO, such as clearing beach obstacles, creating ramps for landing craft, filling craters, removing road obstacles, sealing cave defenses, and general earthmoving duties.
M4A2 gun and dozer tanks from 4th Marines Tank Company
Guam, 1944.
http://olive-drab.com/idphoto/id_photos_m4_sherman_bulldozer.php

See more about Sherman dozers in my M4A1 Sherman dozer topic.

 Specs:

Medium Tank M4A3 (75mm)
Place of origin            Type                                
United States
Medium tank
Service history
In service
1942–55 (U.S.)
Used by
United States and France
Production history
Designer
U.S. Army Ordnance Department
Designed
1941
Manufacturer
 Fisher Tank Arsenal and Ford Motor Company
Produced
1942–45
Number built
4.110
Specifications
Weight
31.500 Kg
Length
6,27 m
Width
2.66 m
Height
2.93 m
Crew
5 (commander, gunner, loader, driver, co-driver)

Armor
100mm - max. hull to 90mm turret
Main armament
75 mm M3 L/40 gun (104 rounds)
Secondary armament
.50 cal Browning M2HB
mg (300 rounds),
.30-06 Browning M1919A mg (4.750 rounds)
Engine

Power/weight
15.8 hp/metric ton 
Transmission
Spicer manual,
synchromesh, 5 forward and 1 reverse gear
Suspension
Vertical Volute Spring Suspension (VVSS)
Fuel capacity
630 litres - 80 octane
Operational range
161 km - road
Speed (max.sustained)
42 km/h

M1 - M1A1 Dozer Blade
Type
Front tank-mounted
dozer blade
Hydraulic operated
Place of origin     
United States
Service history
Wars
World War II - Korea
Production history
Designed
1942
Specifications

Height
Over-all widht


Adds to tank weight


Lift height of blade


Lift load (on blade)
1.220mm
M1: 3.150mm
M1A1: 3.505mm

M1: 3.220 Kg
M1A1: 3.350 Kg

M1: 860mm
M1A1: 1.060mm

M1: 1.820 Kg
M1A1: 2.260 Kg

The kit and parts:
      For this project, I used an old and "all wrong" Italeri kit (#6389) as a base kit...
Italery box art: Simply awful. the turret looks like an egg !!!
...and the dozer blade what's left of an previous project. The dozer come from Academy M4A3E8 Sherman 105 howitzer (#13207).
Another awful box art... Academy kit
...and with misinformation: the dozer is the M1A1 model, not M1.
      My goal with this project is to build a kit to test an idea: Use the dozer blade Academy M1A1 as M1, ie, the most common type. Let's go with the challenge!!!
      I have a dozer blade M1 from Verlinden (#648) in my closet, but I did not want to waste a more refined resin kit with this inferior injected Italeri kit.
Conversion kit from Verlinden. Good stuff...
      Let's try to turn the dozer Academy M1A1 in a most common M1 blade: the difference between the width of the blades would be 10mm in the scale 1/35, but when I put the blades side by side, the difference was 7mm (sorry...my comparative photo is lost... but see the pic below...)
Almost equal in sizes...
      The first challenge was scratch the suspension mounting brackets for VVSS tanks. For that, I scanned the Verlinden metal parts and cutted the plasticards in the proper size. My objective was not to make the wide pivot, but scratch the suspension bracket with the standard pivot for the M1 blade (narrow).
Verlinden metal parts scanned...
  
Italeri hull and suspensions
Academy blade and
brackets in scratch
Deep wading gears in place...
Notice the main gun: spare part from Dragon M4A1 early in the
late 75mm M4 turret: high bustle, commander vision cupola and loader hatch.
Low cost project!!!
      My girl shows a late configuration of the 75mm turrets: high bustle, all vision commander cupola and loader hatch.
M4A3(75)W's of CCA 14th Armored Division in Cirey, France November 23, 1944. (Sherman Minutia website)

Turret and front glacis with spare links.
Notice the wood boards as auxiliary armour
Right side
Primer!!!
Olive drab
Lifecolor jar. nice stuff...
      For the cammo, I sought inspiration in these colors of the Marines in the Pacific.

Loved this Shermie dozer...
      But I'm not exactly reproduce this Sherman, because the models are different and the kit is very inaccurate ... I'll make a M4A3 dozer generic, unspecific, called Bastard !!
Colors in the cammo...Tracks with duckbills from Tamiya


The M4A3 Sherman dozer BASTARD was born...
Dirty in thee blade...

      And my swift and mad project was done. The kit represents a M4A3 (75) Sherman dozer BASTARD with deep wading gear, immediately after landing on an island under Japanese rule, in 1944-45. Marine Corps, unit unknow.
M4A3 Sherman dozer BASTARD - Marine Corps, 1944-45.

M4A3 Sherman dozer BASTARD - left side



M4A3 Sherman dozer BASTARD - right side


M4A3 Sherman dozer BASTARD with Kojak and Rover, the dog.
M4A1 and M4A3 Sherman dozer
M4A1 and M4A3 Sherman dozer
Notice the blades: M4A1 Verlinden and M4A3 Academy
      Well, after the completion of this project, I consider the option of the use the dozer Academy as a great option. The price of a Verlinden kit is more expensive than a complete Academy kit and you still gets a Sherman M4A3E8 Easy Eight (excellent) as a bonus ... !!

See you soon!!!

5 comentários:

  1. @João Gilberto:
    Obrigado, Grande Chefe Piratininga !!! Hugs, my friend!!!

    @Unknown:
    Thanks a lot, my anonymous friend!! Take care !!!

    ResponderExcluir
  2. Mestre Serra, o que é necessário para adaptar a Dozer Academy num chassi que não seja do tipo E8?

    ResponderExcluir
  3. Hi.
    Thank you for these tips
    Its coming right ("rightly") the two pieces :)

    Awesome job once again.
    Thanks for sharing.
    I knew that, one small tip, and something happens very quickly.

    However, war time usa road works, (Gradall)
      and after WW2 German cities in ruins
    to create a base for new technology development.
    Dozers, and excavators, and loaders.
    The first fully hydraulic machines advances are Poclain and Liebherr...

    I wish a happy bright-night summer festival time,
    days 24-26, in June

    ResponderExcluir